 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
a high quality engine
that is attractive,
popular and reliable,
you have found it!
The Red Wing Motor
Company uses high
quality brass and
iron castings in the
construction of our
models.
We have excellent
builders that will
amaze you with their
attention to detail.
Each engine is test
run by the builder
then shipped to our
headquarters here
in Lead Hill,
Arkansas.
Each engine is
disassembled at the
factory in
preparation for
painting. While the
engine is in pieces,
it is re-inspected for
quality control. We
use Epoxy based
paint that will stand
up against oil and
gasoline.
After painting, each
engine is
reassembled and
test run for at least 2
hours. During this
time we make sure
that no screws or
bolts have worked
loose and that
everything looks and
feels good.
Each engine is
mounted on a Red
Cedar base that is
cut and sawn on our
own property here in
Arkansas. It is
covered with a
urethane finish that
is resistant to oil and
gasoline.
A rechargeable
battery in mounted
inside the buzz coil.
A connector is
located under the lid
that is used for the
battery charger.
There is a miniature
on/off switch located
under the lid of the
buzz coil.
The spark plug wire
is run through a
channel cut into the
bottom of the cedar
board. You can see
in the first photo that
the spark plug wire
disappears into the
Cedar board.
The engines in the
photos have been
sold, but orders will
be taken and filled in
the order received.
Your engine will look
almost exactly like
what you see in the
photos.
The first 4 photos
are of our 1/3 scale
2.5 HP Red Wing Air
Cooled engine.
The next 4 photos
show our 1/4 scale 5
HP water cooled
engine.
To order a
completed engine,
call the factory at
1-870-436-3921 and
talk with Rich.
Payment can be
made with a bank
check or a credit
card. Credit cards
will be accepted only
through our PayPal
account.
Arrangements will be
made upon request.
A completed Air
Cooled or Water
Cooled Red Wing
Engine will cost you
$2400.00 plus
freight.
The average weight
of a crated engine is
65 pounds. Freight
cost within the USA
is about $75.00
including insurance.
Thanks for looking
and have a nice day!
