 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
available for those not
lucky enough to have
common materials laying
around the shop.
Materials like flat stock,
round stock, hex stock,
and all of the other metal
and brass parts that are
needed to build your
engine. It is available for
$55.00 plus $8.00 S&H
to all 50 states.
1/8" Scale Mixer Casting kits and
completed mixers. This is the
same mixer used on the 1/4 scale
5 hp and the 1/3 scale 2.5 hp Red
Wing model engines. It includes
the mixer and nut castings as well
as the main valve spring and
needle valve o-ring.
Now the kit includes a complete
set of plans!
The cost is $30.00 plus $5.00
S&H to all 50 states
Lukenheimer mixers.
The cost is $100.00 plus $5.00
S&H to all 50 states
the perfect match for our Red
Wing Buzz Coils. A fully
charged battery will run your
engine for weeks without
recharging
The cost is $40.00 plus $8.00
S&H to all 50 states.
model engine you may want to
consider an extra battery.
This battery will work with the
charger above.
The cost is $22.00 plus $5.00
S&H to all 50 states.
Are your old springs tired or damaged? If so, order a
complete set of replacement springs for your Red Wing.
The set includes 2 governor weight springs, 1 mixer
spring, 1 contact stud spring, 1 latch out bar spring, 1
intake valve spring and 1 exhaust valve spring.
The spring set is $16.00 plus $2.00 S&H for priority mail
to all 50 states
These piston rings are for a
1.25 inch piston. They are
3/32 thick.
Sold in pairs
The cost is $10.00 plus
$2.00 S&H to all 50
states.
Rings
These piston rings are for a
1.375 inch piston. They are
3/32 thick.
Sold in pairs
The cost is $12.00 plus
$2.00 S&H to all 50
states.
Iron Piston Stock
This piston material is a high
quality, extruded, high density cast
iron. It is provided oversize so
there is plenty of room for
machining to get your 1.25" piston.
This is the same material that we
supply in our casting kits.
The cost is $8.00 plus $5.00 for
shipping.
Density Cast Iron
Piston Stock
This piston material is provided
oversize so there is plenty of room
for machining to get your 1.375"
piston.
The cost is $8.00 plus $5.00 for
shipping.
those hard to find oiling
accessories. We now carry
what you need for your project.
The oiler has a total overall
height of 1.75", is adjustable
and has a sight port. Threads
are a 1/4" - 40 MTP $26.00
The small oil cup is 5/8" tall with
a 10-32 thread. The larger oil
cup is 3/4" tall and has a
1/4"-32 thread. $6.00 each
1 oiler, 1 small oil cup and 2
large oil cups are what you
need for your
Red Wing Motor
Entire set is $40.00
$4.00 p&h to all 50 states
$2.00 p&h to all 50 states
$2.00 p&h to all 50 states
$5.00 p&h to all 50 states
5/32 - 40 thread and goes
on the head of your Red
Wing. A relief valve is not a
requirement but it is
functional and closely
reproduces the original.
The Cost is $25.00 plus
$2.00 p&h to all 50 states.
piece, solid brass, connecting rod with a brass oil cup.
But we didn't stop there. Our company name appears in
raised letters with a matt background.
This connecting rod is 100 thousandths longer than specified
in the blue prints. The increased compression improves
engine performance. If you don't want to build a connecting
rod or if you are just looking for that special touch, you won't
go wrong with this item!
The cost is $85.00 plus $5.00 for priority S&H to all 50 states.
Additional shipping charges will apply for other countries
This is just a little extra piece to add to your collection. The
wrench is machined on a CNC milling machine and made
of solid brass. The engraving is also done on theCNC
machine. It is a perfect fit for the CM-6 spark plug and
works great with the water cooled Red Wing Engine. An
adapter will be available later to work with the air cooled
engine.
The cost is $15.00 plus $5.00 for freight.
Are you having trouble finding those little #3-48 bolts. How about the
#5-40 bolts? The 4-40 set screws could be a problem too.
We have put together an assortment of hardware that is specific to the
kit that you are building. The water cooled screw assortment has 80
pieces while the air cooled screw assortment has 84 pieces. The screw
assortments include bolts for the head, crank shaft caps, push rod plates
etc... All of the nuts and washers are also included.
The blue prints call for studs to be installed for some of the assembly.
The screw assortment includes the bolts that can be substituted for the
studs. All of the bolts, nuts and flat washers are custom made on a
screw machine and have that old fashioned look.
The screw assortment for the water cooled engine sells for $35.00 while
the screw assortment for the air cooled engine sells for $38.00.
Postage is $5.00
screw assortment.
assortment.
can be used as a replacement on our
engine or any other engine that uses
the same specs.
They have a 14.5 degree pressure
angle and a 0.375 bore. The DP is
24-24 for the small gear and 24-48 for
the large gear. The center to center
for a perfect mesh is 1.500
The cost is $30.00 plus $5.00 for
freight.
Price break on quantity.
an epoxy based paint
that I have used for
about 6 years. It can be
applied over any clean
metal surface. It can
even be applied over
light rust.
This is an inexpensive
paint that will give a
shiny finish that seems
to last for ever. The
most important thing is
that it is highly resistant
to oil and gasoline. If
you have ever spilled a
little gas on regular
enamel paint, you know
what a mess you end up
with.
There are other paints
that can do a good job,
but this is the one I use
and I don't think I will
ever change. If it isn't
broke, don't fix it!
Quarts are $10.00 each.
Shipping is $6.00 a quart.
Available colors are
Black, Red and
Forest Green.
than 1 quart,
call for special
shipping.
We will ship up
to 3 quarts for
$10.00
Quarts are $10.00 each.
Shipping is $10.00 a quart.
Quarts are $10.00 each.
Shipping is $10.00 a quart.
Quarts are $10.00 each.
Shipping is $10.00 a quart.
gun, you can still spray your
model with any custom paint
you want!
This portable spray tool from Crown
is an excellent alternative to the
traditional spray gun and air
compressor. You can mix your own
paint and pour it into the plastic
screw on bottle. The black sprayer
body is snapped onto a can of air
and you are ready to paint. Extra
plastic bottles and extra cans of air
are available so this is not a throw
away item.
I don't sell anything I have not tried
first, and I have to say I was
surprised at the quality of the job I
got out of this sprayer. I was able to
spray 2 models with only 1 can of
air. There are 3 different tips that
can be used that control the spray
pattern. This really does work great!
sprayer body, 3 spray tips and 1
plastic mixing bottle.
$12.00 plus $8.00 P&H
$6.00 plus $4.00 P&H
$3.00 plus $1.00 P&H