 |
| |
 |
| |
 |
| |
 |
| |
 |
(metric 4100) lathe includes a powerful 90 VDC motor with electronic speed controller, a
2.75" (70mm) x 6.0" (152mm) crosslide, 15" (381mm) steel bed to allow 8" (203mm)
between centers, standard 1-5/8" (41mm) laser engraved aluminum handwheels, pulleys,
belt, faceplate, lathe dog, two dead centers, three hexagonal keys, tool post, sharpened
high-speed steel cutting tool, eight-foot, three-wire power cord and instruction booklet.
This lathe can turn a part up to 3.5” in diameter over the bed or up to 1.88” over the
carriage without riser blocks. With an optional riser block, parts up to 6” in diameter can
be turned over the bed. The lathe has 8” of space between centers. The electronic speed
control allows continuously variable speed control from 70 to 2800 RPM without belt
changes. There is a second pulley position available that offers extra torque at low RPM if
needed. This lathe is a good choice for clockmakers, modelers or those who will be
working on small parts. It is also the most compact lathe we make and is easily used
where space is at a premium and can be stored on a closet shelf.
The model 4500 (4530) lathe is a standard model 4000 (4100) 3.5” x 8” lathe
upgraded to include two adjustable “zero” handwheels on the crosslide and leadscrew.
The lathe includes the motor and its speed controller, a 2.75" (70mm) x 6.0" (152mm)
crosslide, 15" (381mm) steel bed to allow 8" (203mm) between centers, pulleys, belt,
faceplate, lathe dog, two dead centers, three hexagonal keys, tool post, sharpened high-
speed steel cutting tool, eight-foot, three-wire power cord and instruction booklet. This
lathe can turn a part up to 3.5” in diameter over the bed or up to 1.88” over the carriage
without riser blocks. With an optional riser block, parts up to 6” in diameter can be turned
over the bed. The lathe has 8” of space between centers. The electronic speed control
allows continuously variable speed control from 70 to 2800 RPM without belt changes.
There is a second pulley position available that offers extra torque at low RPM if needed.
Adjustable zero handwheels allow the user to reset the handwheel to a zero reading at
any time without moving the leadscrew. This makes dialing in the next dimension easier,
as you are starting from zero each time. It also helps eliminate math errors. This is a
feature normally found on expensive full-size machines, but not often available on a
machine of this size and price.
4000 & 4500
Lathes
INCLUDES:
• Model 4000 (4100) 3.5" x 8" lathe
• P/N 1041 2.5" 3-jaw self-centering chuck
• P/N 1072 Jacobs 1/4" tailstock drill chuck w/ key, #0 Morse arbor, #1 Morse
arbor with drawbolt
$675.00 (Save $45.00)
For 4000A Package with digital readout installed,
specify P/N 4000A-DRO (inch) or 4100A-DRO (metric)
$1000.00
For 4000A Package that is CNC-Ready with two
stepper motor mounts installed, specify P/N 4000A-CNC (inch)
or 4100A-CNC (metric)
$855.00
4000B LATHE PACKAGE (Metric 4100B)
INCLUDES:
• Model 4000 (4100) 3.5" x 8" lathe
• P/N 1041 2.5" 3-jaw self-centering chuck
• P/N 1072 Jacobs 1/4" tailstock drill chuck w/ key, #0 Morse arbor, #1 Morse
arbor with drawbolt
• 1074 Steady rest
• 1191 Live Center
• 3002 Cutoff tool and holder
• 3007 1/4" HSS 3-piece cutting tool set (RH, LH, boring)
• 3020 Sherline 5/32" T-driver
• 3021 3-piece center drill set
$850.00 (Save $65.00)
For 4000B Package with digital readout installed,
specify P/N 4000B-DRO (inch) or 4100B-DRO (metric)
$1175.00
For 4000B Package that is CNC-Ready with two
stepper motor mounts installed, specify P/N 4000B-CNC (inch)
or 4100B-CNC (metric)
$1050.00
4000C LATHE PACKAGE (Metric 4100C)
INCLUDES:
• Model 4000 (4100) 3.5" x 8" lathe
• P/N 1041 2.5" 3-jaw self-centering chuck
• P/N 1072 Jacobs 1/4" tailstock drill chuck w/ key, #0 Morse arbor, #1 Morse
arbor with drawbolt
• 1074 Steady rest
• 1191 Live center
• 1270 compound slide
• 3002 Cutoff tool and holder
• 3007 1/4" HSS 3-piece cutting tool set (RH, LH, boring)
• 3020 Sherline 5/32" T-driver
• 3021 3-piece center drill set
• 3100 Thread cutting attachment
$1090.00 (Save $75.00)
For 4000C Package with digital readout installed,
specify P/N 4000C-DRO (inch) or 4100C-DRO (metric)
$1415.00
For 4000C Package that is CNC-Ready with two
stepper motor mounts installed, specify P/N 4000C-CNC (inch)
or 4100C-CNC (metric)
$1290.00
4500A LATHE PACKAGE (Metric 4530A)
Same as 4000A (4100A) package above except adjustable "zero"
handwheels replace standard handwheels.
$725.00
4500B LATHE PACKAGE (Metric 4530B)
Includes all items shown in 4000B/4100B package above except adjustable
"zero" handwheels replace standard handwheels.
$900.00
4500C LATHE PACKAGE (Metric 4530C)
Includes all items shown in 4000C/4100C package above except adjustable
"zero" handwheels replace standard handwheels.
$1145.00
$675.00
$1000.00
$855.00
$850.00
$1175.00
$1050.00
$1090.00
$1415.00
$1290.00
$725.00
$900.00
$1145.00
between centers. Several upgrades are included in the purchase price. Standard
equipment is the same as on the model 4000; that is, 90 VDC motor with electronic
speed controller, a 2.75" (70mm) x 6.0" (152mm) crosslide, pulleys, belt, faceplate,
lathe dog, two dead centers, three hexagonal keys, sharpened high-speed steel
cutting tool, eight-foot, three-wire power cord and instruction booklet.
In addition, the model 4400 lathe has a 24" (610mm) bed that has 17" (431mm)
between centers, a 2.5" (63mm) resettable “zero” handwheel on the leadscrew, two
2" (51mm) resettable “zero” handwheels on the crosslide and feed screw and a
rocker tool post (P/N 3057) substituted for the standard tool post used on the
shortbed lathes. The electronic speed control allows continuously variable speed
control from 70 to 2800 RPM without belt changes. There is a second pulley position
available that offers extra torque at low RPM if needed.
Many machinists find that the extra space between centers comes in handy when
working with a part held in a chuck and a larger tailstock chuck with a long drill bit in
place. The combination of chucks, part and drill can eat up a lot of the available
center-to-center distance, and a little extra capacity is often appreciated.
This lathe offers the same diameter turning capacities as the shorter lathe and same
powerful motor/speed control. The differences are both the extra 9” of center
distance and the addition of extras like the adjustable zero handwheels and rocker
toolpost, making this lathe a good value for the extra cost.
4400 Lathe
INCLUDES:
• Model 4400 (4100) 3.5" x 17" lathe (with adjustable "zero" handwheels and
rocker toolpost)
• P/N 1040 3.1" 3-jaw self-centering chuck
• P/N 1069 Jacobs 3/8" tailstock drill chuck w/ key, #0 Morse arbor, #1 Morse
arbor with drawbolt
$800.00 (Save $55.00)
For 4400A Package with digital readout installed,
specify P/N 4400A-DRO (inch) or 4410A-DRO (metric)
$1095.00
For 4400A Package that is CNC-Ready with two
stepper motor mounts installed,
specify P/N 4400A-CNC (inch) or 4410A-CNC (metric)
$980.00
4400B LATHE PACKAGE (Metric 4410B)
INCLUDES:
• Model 4400 (4100) 3.5" x 17" lathe (with adjustable "zero" handwheels and
rocker toolpost)
• P/N 1040 3.1" 3-jaw self-centering chuck
• P/N 1069 Jacobs 3/8" tailstock drill chuck w/ key, #0 Morse arbor, #1 Morse
arbor with drawbolt
• 1074 Steady rest
• 1191 Live Center
• 3002 Cutoff tool and holder
• 3007 1/4" HSS 3-piece tool set (RH, LH, boring)
• 3020 Sherline 5/32" T-driver
• 3021 3-piece center drill set
$980.00 (Save $75.00)
For 4400B Package with digital readout installed,
specify P/N 4400B-DRO (inch) or 4410B-DRO (metric)
$1280.00
For 4400B Package that is CNC-Ready with two
stepper motor mounts installed,
specify P/N 4400B-CNC (inch) or 4410B-CNC (metric)
$1160.00
4400C LATHE PACKAGE (Metric 4410C)
INCLUDES:
• Model 4400 (4410) 3.5" x 17" lathe (with adjustable "zero" handwheels and
rocker toolpost)
• P/N 1040 3.1" 3-jaw self-centering chuck
• P/N 1069 Jacobs 3/8" tailstock drill chuck w/ key, #0 Morse arbor, #1 Morse
arbor with drawbolt
• 1074 Steady rest
• 1191 Live center
• 1270 compound slide
• 3002 Cutoff tool and holder
• 3007 1/4" HSS 3-piece tool set (RH, LH, boring)
• 3020 Sherline 5/32" T-driver
• 3021 3-piece center drill set
• 3100 Thread cutting attachment
$1220.00 (Save $85.00)
For 4400C Package with digital readout installed,
specify P/N 4400C-DRO (inch) or 4410C-DRO (metric)
$1515.00
For 4400C Package that is CNC-Ready with two
stepper motor mounts installed
specify P/N 4400C-CNC (inch) or 4410C-CNC (metric)
$1400.00
$800.00
$1095.00
$980.00
$980.00
$1280.00
$1160.00
$1220.00
$1515.00
$1400.00